Recall 79V044000
Suspension — Flxible · reported 5 Jan 1979 · 1,100 vehicles potentially affected
What's wrong
A HARDENED WASHER REQUIRED IN MOUNTING THE UPPER RADIUS ROD BRACKET TO THE TOP OF THE FRONT AXLE WAS OMITTED DURING ASSEMBLY. THE OMISSION OF THE HARDENED WASHER COULD CAUSE A GAP UP TO .063" BETWEEN THE TOP OF THE MOUNTING FLANGE AND THE STEERING GEAR ASSEMBLY. THIS GAP WILL PREVENT THE SPECIFIED CLAMPING FORCES FROM BEING APPLIED TO THE UPPER RADIUS ROD BRACKET. THE INABILITY TO CORRECTLY CLAMP THE UPPER RADIUS ROD BRACKET TO THE AXLE COULD CAUSE ABNORMAL STRESS LOADS TO BE APPLIED TO THE BRACKET DURING VEHICLE OPERATION. CONTINUED OPERATION UNDER THESE CONDITIONS COULD RESULT IN VERTICAL BRACKET FRACTURE. IF COMPLETE SEPARATION OF THE BRACKET OCCURRED, THE FRONT AXLE COULD SHIFT, CAUSING BINDING AND RUBBING OF THE STEERING SHAFT AND, EVENTUALLY, LOSS OF STEERING CONTROL.
The fix
DEALER WILL INSPECT AND, IF NECESSARY, REPLACE BRACKETS WITHOUT CHARGE TO OWNER.
VEHICLE DESCRIPTION: BUSES.SYSTEM: SUSPENSION; AXLE RADIUS ROD.CONSEQUENCES OF DEFECT: LOSS OF STEERING CONTROL COULD RESULT IN A VEHICLEACCIDENT AND SERIOUS PERSONAL INJURIES.
Vehicles covered by this recall
Whether a particular car is affected and still unrepaired depends on its VIN — a model year being listed does not mean every car of that year is included. Check any VIN free on CarLogs, or at nhtsa.gov/recalls.
Is this car's recall fixed?
Recall repairs are free at any franchised dealer, for the life of the vehicle. A CarLogs report shows the recall status for a specific VIN as reported by the manufacturer — whether it's open or repaired, and whether the fix is available yet.
Source: NHTSA Office of Defects Investigation recall database. Look up another campaign →