2000 Dodge durango 4x2 v8
1B4HR28Z3YF241466
Vehicle history report for the 2000 Dodge durango 4x2 v8 (VIN 1B4HR28Z3YF241466). White. 110,919 mi reported. Registered in Tx. Unlock full title, salvage, lien & accident history.
![2000 Dodge durango 4x2 v8, White, Sport Utility Vehicle [SUV]/Multipurpose Vehicle [MPV] — representative vehicle photo for VIN 1B4HR28Z3YF241466](https://upload.wikimedia.org/wikipedia/commons/2/20/%2798-%2700_Dodge_Durango.jpg?utm_source=commons.wikimedia.org&utm_campaign=imageinfo&utm_content=original)
At a glance
Vehicle identity & specifications
What's a 2000 Dodge durango worth?
What comparable 2000 Dodge durango vehicles are listed for — a quick gut-check before you negotiate.
Is the seller's price fair? Get this exact VIN's current market value — retail, trade-in & loan value — in the full report.
See this car's exact value →Full vehicle history report
What a full report checks for VIN 1B4HR28Z3YF241466
A full report searches national title databases (NMVTIS) and licensed history providers for this VIN and shows whatever records are on file — not every vehicle has every record type. The decode, safety recalls and owner complaints above are always free.
Safety recalls 4
SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT
ON CERTAIN SPORT UTILITY VEHICLES AND PICKUP TRUCKS EQUIPPED WITH FOUR-WHEEL DRIVE (4X4), IF MOISTURE LEAKS INTO THE FRONT SUSPENSION UPPER BALL JOINT, EVACUATION OF THE LUBRICANT AND CORROSION OF THE JOINT MAY CAUSE THE JOINT TO WEAR OVER AN EXTENDED PERIOD OF TIME. THIS COULD CAUSE A CLUNKING NOISE IN THE FRONT SUSPENSION, WHICH MAY NOT ALWAYS BE HEARD BY THE VEHICLE OCCUPANTS.
Remedy: DEALERS WILL REPLACE THE FRONT SUSPENSION UPPER BALL JOINTS. THIS SAFETY IMPROVEMENT CAMPAIGN BEGAN ON DECEMBER 21, 2004. OWNERS CAN CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
NHTSA Campaign #04V596000 · 21/12/2004SUSPENSION:FRONT:HUB
SKF IS RECALLING 2,805 HUB UNITS, PART NO. BR930361, SOLD AS A SERVICE PART FOR 1997-2004 DODGE DAKOTA VEHICLES AND 1999-2003 DODGE DURANGO VEHICLES EQUIPPED WITH 2-WHEEL DRIVE & REAR AXLE ABS. DUE TO A SPECIFICATION ERROR, THE ROTOR PILOT FOR THE HUB UNIT MAY BE TOO LONG. THIS RESULTS IN THE WHEEL TO NOT BE SEATED FULLY AGAINST THE HUB FLANGE FACE DURING MOUNTING.
Remedy: SKF WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE HUB UNITS FREE OF CHARGE. THE RECALL BEGAN ON NOVEMBER 5, 2008. OWNERS MAY CONTACT SKF VSM NORTH AMERICA CUSTOMER SERVICE AT 1-800-644-8999.
NHTSA Campaign #08E064000 · 20/10/2008ENGINE AND ENGINE COOLING
CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAI…
Remedy: K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.
NHTSA Campaign #06E024000 · 15/03/2006AIR BAGS
VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALB…
Remedy: DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUT
NHTSA Campaign #01V153000 · 08/05/2001We'll email you the moment a new safety recall is issued — no spam, unsubscribe any time.
Common problems & what to inspect
No owner complaints are on file with NHTSA for the 2000 Dodge durango yet — a good sign. Still, run the essential pre-purchase checks below before you buy.
Pre-purchase checklist
- Match the VIN on the dash, door jamb and title — they must be identical.
- Cold-start the engine; listen for knocks and check for blue or white exhaust smoke.
- Test-drive through all gears at low and highway speed — no slipping, shudder or pulling.
- Confirm every warning light clears at startup (none should stay on).
- Check fluids — oil, coolant, transmission — for level, color and leaks.
- Look underneath for rust, fresh undercoating or signs of collision repair.
- Always get an independent pre-purchase inspection from a trusted mechanic.
